The main steps for selecting a tractor are as follows:
Release time:
2024-09-30
Test whether there is any jamming or collision when stepping on the accelerator, and push and pull the main and auxiliary
1) Test whether there is any jamming or collision when stepping on the accelerator, and push and pull the main and auxiliary transmission levers according to the operating procedures to see if there is any jamming or collision.
2) Rotate the steering wheel and check if its free angle is less than 30 ° when the front wheels are stationary.
3) Check the engine oil level, add fuel and coolant for a test run.
4) When the ambient temperature is above 5 ℃, start continuously three times, and within 30 seconds, there should be two successful starts.
5) Run at medium throttle for 10 minutes and check if the exhaust and engine sounds are normal. When running at idle speed, the engine sound should be smooth and low. In the high throttle state, the engine sound should not be harsh or emit black smoke.
6) After parking, check if the tractor has any water or oil leakage.
Related News
national free service hotline:
Address: 651 Fangchang Road, Yingqiu Town, Changle County, Weifang City, Shandong Province